PC Project: WorkPlayStream dual ITX (3-Videos)

Idea: To have one compartment with dual ITX setups. Other for main use from gaming to editing and the second one is for streaming/rendering/things running in the background.

MainPC Specs:

• EVGA FTW GTX 1080 + EKWB Block RTX 3080 3060ti Intel Arc A750 GTX 2080ti
• Ryzen 1800x 2700x 5600x 5800X3D
• Fatal1ty AB350 Gaming-ITX/ac Asus Strix z470 itx  B450I Gaming Plus AC
• 2x8GB 3200MHz G.Skill  2x16GB 3600MHz
• 1x m.2 SSD, 4x 2.5’’ SSD

SecondaryPC:

• MSI GTX 780 + EKWB block
• AMD 1800x 2700x
• MSI B450i Gaming Plus AC Asus Strix z470 itx
• DDR4 2x8GB 3200MHz

Watercooling loop:

• 2x Phobya G-Changer 560mm X 60mm radiators
• EKWB D5+reservoir
• The case is going to be my hand-made cabinet for RC cars many years back.

Monitors:

• 2x Benq XL2411z 24” 144hz
• Dell U3415W 34” 21:9
• Eizo EV2450 24”
• LG 27GPB850-B (1440p 180hz oc)
• Benq XL2411p

First little bit of planning how to fix everything even tho it is only ITX boards.

After this, it was time to start designing, 3D printing, and assembling frames to hold radiators on top of the cabinet! This turned out perfectly and was quite easy to make. Frames connect to the board with screws.

I added 2 holes to the wall side for cables and created big hole in the roof for radiators to exhaust all the heat. Little metallic mesh and looking like a case!

I’ve made door to this cabinet also back in the day, added hole for fans (6x120mm) and a corner for USB/Audio ports. A little bit of color and looking great! Ended up using Arctic P12 and P14 fans for great price and performance. Also PST chaining worked wonders for this build totaling over 14-fans.

Collects a quite bit of dust due high volume of air moved even when all fans are on low speeds. Time to make fan filter to the front panel. Little more metallic mesh and 3D printed frame. I need to add magnets and some filter fabric and that’s done. I’ve just not done this yet..